Combining Log Levels (err and warn)

What is dmesg Command

The name “dmesg” is derived from “display message” and provides a convenient way to examine the kernel ring buffer, which stores messages generated by the kernel during the boot process and while the system is running. These messages contain crucial information about hardware detection, device initialization, and any potential issues encountered by the kernel....

Usage of dmesg command:

All the messages received from the kernel ring buffer is displayed when we execute the command “dmesg”, here only the latest messages will be shown. This is used to check messages stored in the kernel ring buffer. In the case of non-root user use “sudo” to run root-level commands without being root....

1. Viewing Logs Page-Wise with Less

While the dmesg command provides a wealth of information, the output can be overwhelming. To navigate through logs page by page, you can use commands like tail, head, or less. Here’s an example using less:...

2. Colorizing dmesg Output

dmesg gives coloured output by default as shown above but if you want to colourize it for proper understanding of the messages then you can colourize them using the “L” command....

3. Human-Friendly Timestamps

dmesg uses timestamps in seconds and nanoseconds, for human-friendly format use the “H” option for timestamps. The same is displayed in less. In the timestamp, it shows the date and time. Messages taking place every minute are marked as seconds and nanoseconds....

4. Standard Date and Time Format

We use -T (human-readable) option as they display with standard date and time. In this option, the resolution is lowered by a minute...

5. Monitoring Real-Time Logs

To monitor real-time logs –follow option is used with dmesg, and it displays the recent messages at the bottom of the terminal...

6. Viewing Specific Number of Messages with Head

As we see that dmesg gives out large output, we can use the tail or head option to list out a specific number of messages and view them. Here we check for the first 10 messages using the head option...

7. Viewing Last 10 Messages with Tail

The last 10 messages are displayed using the tail option...

8. Case-Insensitive Searching

Here we’ll use the -i (ignore) option to search for a specific string or patterns or message by scanning through the dmesg output but this option will ignore the case of the strings and will focus only on the string we search for. In the results, it will display messages for both “USB” and “usb”  combinations...

9. Searching for Disk Related Messages

Searching messaged related to Memory, RAM, Hard Disk or USB Drive using grep command with dmesg. Here grep is used with “sda” to check which hard disks have been detected by the kernel. sda command is used to check for hard disk and will display the messages wherever sda is listed...

10. Filtering Messages by Log Level (Info)

A level is assigned to each message logged to the kernel ring buffer. The level represents the significance of the information in the communication. The levels are as follows:...

11. Combining Multiple Log Levels

To extract messages with multiple log levels we have to combine two or more log levels. Here we are using “debug and notice” log levels to extract messages....

12. Combining Log Levels (err and warn)

Another example of combining more than one log level is “err and warn” where it will display error logs and warning logs...

13. Filtering Messages for Specific Network Interface (eth0)

Displaying dmesg messages for eth0 user interface use grep option followed by eth0...

14. Filtering Messages by Facility (daemon)

Filtering dmesg messages using facility option -f where it will display messages of a particular facility “daemon”....

15. Decoding Facility and Level

-x (decode) option is used to display the facility and level as prefixes of every line in a human-readable format....

How to view kernel messages in Linux – FAQs

What is the purpose of the dmesg command in Linux?...

Conclusion

In this article we discussed how to kernel message in Linux using the dmesg command in Linux serves as a vital tool for monitoring and troubleshooting kernel messages, providing insights into system hardware and software interactions. This article covers the basics of using dmesg and explores advanced functionalities, including viewing logs page-wise, colorizing output, and monitoring real-time logs. Practical applications such as saving logs, searching for specific terms, and filtering messages by log level are also discussed. With this comprehensive guide, users can effectively leverage the dmesg command to gain a deeper understanding of their Linux system and diagnose issues efficiently....