Applications of BJT and JFET
Here, we are going to discuss the Applications of BJT and JFET
Applications of Bipolar Junction Transistor (BJT)
- Amplifiers: BJTs have a very large market in audio and radio amplifier systems. They replace signal amplifiers to boost the signal.
- Switching Circuits: Besides, BJTs are applied as switches in digital circuits to only allow the current to flow from the collector toward the emitter terminal.
- Power Supply: BJTs are widely used in power supply circuits for voltage regulation, and for signal magnification (amplification).
- Oscillators: The output of BIOS depends on the work of BJTs and in these electronic circuits they play a very important role.
- Audio Systems: BJTs, besides sounding high fidelity, are very efficiently used in various way, such as first-stage amplifiers and power amplifiers in audio systems.
Applications of Junction Field-Effect Transistor (JFET)
- High-Input Impedance Amplifiers: In particular, the JFETs exhibit high -input impedance and thus they are preferred in applications where it is of high importance, like in high-fidelity audio amplifiers.
- Voltage-Controlled Resistors: JFETs can be employed in circuits for controlling the parameters or variables by using a power source.
- Analog Switches: Unlike metal-oxide-semiconductor field-effect transistors (MOSFETs), which are employed in the digits processing, JFETs are analog switches allowing or blocking the passage of signals in accordance with the applied voltage.
- Low-Noise Amplifiers: It is the low signal distortions due to the small noise levels that makes JFETs carriers in the infrastructure where the preservation of the signal quality is paramount.
- Battery-Operated Devices: The JFET power consumption is low thereby equipped for use in battery-supported electronic gadgets that can bless with extension of batteries life.
Difference Between BJT and JFET
Bipolar Junction transistors (BJT) & Junction Field-Effect transistors (JFET) are important components that are used in many electronic circuits, which are based on semiconductors. In a BJT, there are three different layers of semiconductor material: N-type and P-type semiconductor material forming either an NPN or PNP configuration. As its functioning principle is based either on the movement of electrons via the junction or the flow of holes from the emitter to the collector terminal, it is one of the most effective and robust devices.
As JFET’s counterpart, the gate features a channel in which semiconductor material either will be N-type or P-type. The flow of current in a JFET is governed by a voltage being connected across the junction, which is responsible for the variation in the channel’s width and, in turn, the current between the source and drain terminals.
The JFET, unlike the BJT, works mainly on the ground of the voltage rather than the current. As for BJT and JFET, these two components exhibit key roles in amplification, switching, and signal processing applications supporting the design diversity of circuits through their peculiar traits and features.
Table of Content
- BJT
- JFET
- Operations
- Comparison
- Advantages
- Disadvantages
- Applications