Disadvantages of Noise Figure

let us see the disadvantages of Noise Figure

  • An increased Noise figure is undesirable but for achieving a low noise figure, complex components are required that can increase the overall complexity of the circuit.
  • Devices with low noise Figures are quite expensive due to their ability to prevent signal deterioration therefore involving components with low noise figures can increase the overall cost of the circuit.
  • The Noise Figure method becomes unreliable because the Noise Figure is dependent on certain environmental factors like temperature, humidity, and other fields. Any variation in the environment will lead to fluctuations in the noise figure of the device giving inconsistent results.
  • Noise Figure calculation is a tedious task. It involves certain special tests which are complex and method-specific. The verification can also be a difficult task which makes scientists choose other methods for performance analysis.
  • Noise Figure is suitable only for new components. Over some time, devices begin to age leading to their wear and tear. Therefore, we can’t use noise figures in the long run.

Noise Figure

Often while dealing with signals in electronics and communication systems, we encounter distortion in signals due to noise. Noise is an unwanted disturbance that can attenuate our signal which disrupts making it difficult to study the signals. In this article, we will study the noise figure which is an important instrument used for measuring the quality of signals.

Later, we will understand the work behind calculating the noise figure. Through a diagram, we will also see the formula used for calculating noise figures with a physical understanding of the formula. Some solved examples have been provided to enhance the understanding of readers about the topic. We will look at the advantages, disadvantages, and applications of noise figures in the real world. In the end, we will conclude the article with some frequently asked questions that readers can refer to

Table of Content

  • Noise Figure
  • Working Principle
  • Mathematical Expression
  • Construction
  • Solved Examples
  • Applications
  • Advantages
  • Disadvantages

Similar Reads

What is a Noise Figure?

The noise figure is an important concept that is used to study the deterioration in the received signals due to noise. During the propagation of a signal, it can be affected by noises it encounters in the travelling medium. These noises can not only disrupt the original signal but also make it difficult to obtain the actual message without any errors. A lower noise figure indicates a better-performing device because it adds less noise than a device with a higher noise factor....

Working Principle of Noise Figure

Noise Figure is used to measure the amount of disruption in signal due to noise. Let us see the principle used behind calculating the noise figure....

Mathematical Expression on Noise Figure

Using the diagram, it is possible to determine the noise figure formula from the conditions described above. G will be 0 for the ideal system....

Construction of Noise Figure

The noise figure of an element is a necessary parameter and various methods can be used for measuring this parameter. Let us see how...

Solved Examples on Noise Figure

Let us see the solved examples of Noise Figure....

Applications of Noise Figure

Let us see the applications of Noise Figure :...

Advantages of Noise Figure

Let us see the advantages of Noise Figure :...

Disadvantages of Noise Figure

let us see the disadvantages of Noise Figure...

Conclusion

We have seen how crucial noise is in telecommunication engineering. The quality of the signal is greatly affected by noise generated during the transmission of the signal and the noise figure is a parameter that was introduced in this article to analyze the quality of the signal....

Noise Figure – FAQs

What are some other methods used for measuring the performance of noise in communication systems?...