Linux Alternatives for Netsh Command in Linux

Linux Alternatives for Netsh Command in Linux

Linux is preferred the most regarding security and hardware compatibility to manage networks. As a network administrator, consider the following Linux utilities for network configuration or troubleshooting....

1. ifconfig

ifconfig is the abbreviation of Interface Configuration, a basic network command in Linux having core functionality to configure/debug/display the network interfaces. Moreover, it also permits the dynamic configuration of network interfaces, assigning IP addresses, and subnetmasks....

2. ip

The “ip” stands for Internet Protocol, a built-in command in Linux that shows/manipulates routing, network devices, interfaces, and tunnels. It shares similar functionality as the “ifconfig” command but has some extra advanced features such as configuring policy routing, network namespace, and VLAN (Virtual Lan)....

3. route

route is a Linux command that gives the routing table information. The routing table is the set of defined rules for the data packets to be transferred. Moreover, it allows to add, delete, and change the routing entries. You can consider this command if your focus main focus is to manage the IP routing table on the network....

4. netstat

The full form of netstat is Network Statistics, a powerful Linux tool for the configuration and troubleshooting the network statistics. It displays the network connections, interface statistics, routing tables, multicast memberships, and masquerade connections....

5. systemd (Service Manager)

In modern Linux distributions, systemd is the default init system service manager. A network service can be managed through this i.e. enabling/disabling a controlled behavior. For instance, the commands are enabling and disabling the NetworkManager services....

Conclusion

In conclusion, there’s no Netsh command support available in Linux. However several alternative commands are available that share similar functionalities as netsh command does. You can use the ifocnfig, ip, route, and netstat commands. Additionally, the service manager (systemd) can be used to enable/disable the network services....