OSPF Static Neighbors

OSPF Static Neighbors :

In an OSPF autonomous system, when OSPF network type is configured either to be...

OSPF Static Neighbors command:

Router OSPF subcommand Description Example neighbor [cost number] To Specify a neighbor and assign a cost to the neighbor. (cost parameter is optional in this command) Router(config-router)# neighbor 192.168.1.4 cost 180...

OSPF network type commands:

Interface configuration subcommand Description ip ospf Configures an interface OSPF network type to broadcast/non-broadcast/point-to-point/point-to-multipoint (point-to-multipoint -Configures an interface as point-to-multipoint for broadcast media.) no ip ospf network To revert the OSPF network type back to its default configuration....

Configuring OSPF Static Neighbors:

Step 1: Create the physical topology in GNS3 as show in the image below :...