T Flip Flop
The T Flip Flop consists of data input (T), a clock input (CLK), and two outputs: Q and Q’ (the complement of Q).
Block Diagram of T Flip Flop
Given Below is the Block Diagram of T Flip Flop
Circuit Diagram and Truth Table of T Flip Flop
Given Below is the Circuit Diagram and Truth Table of T Flip Flop
Operation of the T Flip-Flop
Given Below is the Operation of T Flip-Flop
- Case 1 (T=0):In this condition the flip-flop remains in its current state regardless of clock input,Also the Output Q will remain unchanged unit the value of T will not change.
- Case 2 (T=1):In this condition the flip flop will change when T input is 1,At each rising or falling edge of the clock signal the output Q will be in complementary state.
Characteristics Equation for T Flip Flop
QN+1 = Q’NT + QNT’ = QN XOR T
Flip-Flop types, their Conversion and Applications
In this article, we will go through the Flip-Flop types, their Conversion and their Applications, First, we will go through the definition of the flip-flop with its types in brief, and then we will go through the conversion of the flip-flop with its applications, At last, we will conclude our article with some FAQs.
Table of Content
- Flip-Flop
- Types
- S-R Flip Flop
- J-K Flip Flop
- D Flip Flop
- T Flip Flop
- Conversion for Flip Flops
- Applications