The output of Configuration
After the configuration of all devices, the network will be able to authenticate with Cisco WLC WPA2 PSK.
Cisco WLC WPA2 PSK Authentication
Cisco Wireless LAN Controllers (WLCs) support Wi-Fi Protected Access II (WPA2) Personal (PSK) authentication for wireless clients. WPA2-PSK provides a more secure alternative to the older WPA and WEP security protocols by using stronger encryption and authentication methods. In WPA2-PSK authentication, a shared secret or passphrase is used to authenticate the wireless client to the access point (AP) or WLC. This shared secret is used to generate a Pairwise Master Key (PMK) that creates an encryption key for encrypting data transmitted between the wireless client and the AP/WLC. WPA2-PSK uses a four-way handshake process to establish the encryption key, ensuring secure communication. WPA2-PSK is relatively secure for small-scale wireless networks, but using a shared secret is less secure than unique login credentials. In larger networks, more advanced security protocols such as 802.1X/EAP may be necessary.
We will learn how to set up a fundamental wireless network using WPA2 Pre-Shared Key (PSK) authentication in this tutorial. To employs the topology and configuration that we developed in the session on Cisco WLC fundamental configuration. The physical topology is as follows:
IP Addressing of Components:
There are two VLANs on this network:
- Management VLAN is VLAN 10.
- VLAN 20: A user-accessible wireless network.
Please refer to the table of component IP addresses to configure all devices of the topology given above.
Components |
VLAN |
IP Addresses |
---|---|---|
Wireless LAN Controller |
10 |
192.168.10.100 |
Switch |
10 |
192.168.10.254 |
Access Points 1 and 2 |
10 |
DHCP connections |
Switch |
20 |
192.168.20.254 |